Herunterladen Inhalt Inhalt Diese Seite drucken

Anschlüsse Und Stromversorgung; Connections And Power Supply - TCi T15-VGA Handbuch

Inhaltsverzeichnis

Werbung

3.3 Anschlüsse und Stromversorgung
1:
Touch-Anschluss RS232 Sub-D 9-pol. (optional)
2:
Spannungsversorgungseingang 12 VDC,
optional: 24 VDC bzw. 100/240 VAC, 63Hz, (internes Netzteil)
Leistungsaufnahmen bei internem Netzteil: 220V Typ. 50W
3:
VGA-Anschluss(optional DVI
o.Abb.
Tastatur und Mauskabel (Nur bei T15-VGA)
o.Abb.
Verbindungskabel von Bedienelementen (Nur bei T15-VGA/MT)
PE Erdung muss unbedingt angeschlossen werden! Es besteht Lebensgefahr durch einen
elektrischen Schlag, wenn z.B. die Außenhülle der Zuleitung beschädigt ist und das
Gehäuse berührt.
Ludwig-Rinn-Straße 10-14 • D- 35452 Heuchelheim/Gießen • Phone: +49 6 41-9 62 84-0 • Fax: +49 6 41-9 62 84-28 • www.tci.de
Seite 12 von 28

3.3 Connections and Power supply

1:
Touch connection RS232 Sub-D 9-pol. (optional)
2:
Power supply entry 12 VDC,
optionally: 24 VDC or 100/240 VAC, 63Hz,
(internal power supply) Power consumption by internal power
supply: 220V Typ. 50W
3:
VGA connection(optionally DVI
w/fig.
Keyboard and mouse connection (only T15-VGA)
w/fig.
Connection cables from the operating controls (only T15-VGA/MT)
PE ground must be connected! There is mortal danger by an electrical impact, if the outer
hull of the inlet is damaged e.g. and affects the housing.
Ludwig-Rinn-Straße 10-14 • D- 35452 Heuchelheim/Gießen • Phone: +49 6 41-9 62 84-0 • Fax: +49 6 41-9 62 84-28 • www.tci.de
Seite 13 von 28

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

4453T15-vga/mt

Inhaltsverzeichnis