Parts And Components; Before Use; Installation - Cecotec 02437 Bedienungsanleitung

ENGLISH

1. PARTS AND COMPONENTS

Fig. 1
1. LED light indicator
2. Door shelves (freezer compartment)
3. Shelves (freezer compartment)
4. Lower shelf
5. Freezer-compartment drawer
6. Refrigerator-compartment drawer
7. Egg storage container
8. Shelves (refrigerator compartment)
9. Door shelves (refrigerator compartment)
Note:
The graphics in this manual are schematic representations and may not exactly match the
product.

2. BEFORE USE

- This refrigerator includes a packaging designed to protect it during transport. Take the
refrigerator out of the box. You can keep the original box and other elements in a safe
place, this will help you prevent product damage when transporting it in the future. In
case the original packaging is disposed of, make sure all packaging materials are recycled
accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or not in good condition, immediately contact the official Cecotec Technical
Support Service.
Levelling
Make sure you level your refrigerator with the front levelling feet. If it is not levelled, the
-
refrigerator performance will be affected, or it can even cause a malfunction.
After installing the refrigerator, wait 4 hours before using it to allow the refrigerant to
-
stabilise.

3. INSTALLATION

The location you choose for the refrigerator must be properly ventilated and away from heat
sources. Do not place the refrigerator near heat sources, like a cooker, and avoid direct sunlight
to ensure the cooling effect and save on energy consumption. It is not recommended to place
the refrigerator in a wet place, as it may rust and cause electrical leakage.
60
02437_02438_02439_Bolero CoolMarket SBS 430 White/Inox/Dark E_IM_YV_01230110.indd 60 02437_02438_02439_Bolero CoolMarket SBS 430 White/Inox/Dark E_IM_YV_01230110.indd 60 11/1/23 13:08 11/1/23 13:08