ADURO 7+1 Bedienungsanleitung Seite 10

�. Risks
4.1 Potential Risks
Immediately after treatment your skin may appear red. This is normal and the redness will fade
within �-� hours.
You may experience a temporary mild headache after light treatment. If the headache persists
contact a medical professional.
�. Light Sensitivity Test
We highly recommend users perform a light sensitivity test before their first use of the device.
�. Place the device on your inner forearm.
�. Turn it on.
�. Wait � minutes until the session is finished.
�. If your skin feels hot or uncomfortable during the treatment immediately stop! You might
be sensitive to light.
�. The device will automatically turn off after the session is finished. Remove the device and
wait for at least �� hours.
�. Check your skin regularly over �� hours, if your skin appears red and/or itchy discontinue
use of the device.
In the case of light sensitivity please contact customer support.
�. HOW TO USE THE DEVICE
�.� General Use
➀
Before starting the treatment,
thoroughly cleanse your skin,
and remove all make up. Not
doing this may affect light
output and decrease the
effectiveness of the treatment.
08
➁
Feed the adjustable strap
through the hole on the top
of the mask ensuring the
Velcro can be stuck onto the
back of the strap.
➂
You are now ready for your
treatment. Put on the mask
and adjust the straps to secure
it to your face, then adjust the
top strap to your desired
tightness.
SAFE - EASY TO USE - EFFECTIVE