Operation Instruction - Rapid Rm10N Installations- Und Anwenderhandbuch

C． ． ． ． Switch on after finishing all wiring construction and re-checking.
VI. Operation instruction
Picture for keys
Water Temp
Setting
1． ． ． ． Operation Display
A. The display shows Time when the machine is off;
B. The display shows Temperature of the swimming pool water when the
machine is on.
2． ． ． ． Water temperature setting
A． Available no matter the machine is on or off;
B． Press the key
indicates twinkling temp. Press
water temp;
C. 5 seconds later, the controller display will back to the normal mode.
HEAT
or to set water temperature. The controller
8
or to adjust to your required
Power On/Off