Digital message module für amok- & werbetext-lösungen (16 Seiten)
Inhaltszusammenfassung für RCS DMM-618 A
Seite 1
DMM-618 A DIGITAL MESSAGE MODULE AMOK & ADVERTISING TEXT SOLUTIONS FÜR AMOK- & WERBETEXT-LÖSUNGEN - ENGLISH OPERATING INSTRUCTIONS / BEDIENUNGSANLEITUNG - DEUTSCH...
• Connect only to 230 V and 24 V Emergency power (DC). Electromagnetic compatibility and low-voltage guidelines: RCS leaves all devices and products, which are subject to the CE guidelines by certified test laboratories test. By the fact it is guaranteed that you may sell our devices in Germany and in the European Union domestic market without additional checks.
For remote triggering automatisch starten, z. B. von einer Hauptuhr, wie z. B. PTC- DMM-618 A offers 18 dry contacts on its rear side. Up to 240 D, vom AAS-100 A oder von jedem externen Schlie- 18 messages can be triggered remotely, for example from ßerkontakt.
DMM-618 A DIGITAL MESSAGE MODULE GENERAL FUNCTIONS ALLGEMEINE FUNKTIONEN With this signal, memory up to 18 different files can be Mit diesem Signalspeicher können bis zu 18 verschiedene played. The files are in MP3 format on a Compact Flash Files abgespielt werden. Die Files werden im MP3 Format memory card (max.
FRONT & REAR PANEL DMM-618 A DMM-618 A DIGITAL MESSAGE MODULE START STOP CF-CARD RESET ERROR SYSTEM STATUS ACTIVE FRONT PANEL FRONTANSICHT 1. LCD-Display 2x24 1. LCD-Display 2x24 two-line, cleartext zweizeilig, Klartextanzeige 2. Reset Button 2. Reset Taster 3. Status LED‘s ON, ERROR and ACTIVE 3.
DMM-618 A DIGITAL MESSAGE MODULE START START After connecting to the power supply, the following Nach dem Anschluss an die Stromversorgung erscheinen indications appear on the display: folgende Anzeichen im Display: Firmware Version Firmware Version RCS 2011 V1.0 RCS 2011 V1.0...
DIGITAL MESSAGE MODULE DMM-618 A PLAY FILE DATEI ABSPIELEN When a contact is closed, or a corresponding command is Wenn ein Kontakt geschlossen, oder ein entsprechendes received via serial input, the corresponding file starts. Kommando via seriellen Eingang empfangen wird, startet die entsprechende Datei.
DMM-618 A DIGITAL MESSAGE MODULE Get DATA FILE 2 Get DATA FILE 2 ANNOUNCING-TITLENAME2 TITELNAME-Durchsage2 The „SCANNING INPUTS“ display once all the tracks have Nachdem alle Titel ausgelesen wurden erscheint die „SCAN- been read appear. NING INPUTS“ Anzeige. SCANNING INPUTS...
DIGITAL MESSAGE MODULE DMM-618 A COMPACT FLASH MEMORY CARD COMPACT FLASH SPEICHERKARTE The CF card must have the data system FAT32. There may Die CF-Card muss das Datensystem FAT32 aufweisen. Es be a memory card can be used up to 8GB. To test the DT- kann eine Speicherkarte bis zu 8GB verwendet werden.
DMM-618 A DIGITAL MESSAGE MODULE JUMPER SETTINGS EINSTELLUNGEN JUMPER The contact type continuous contact or pulse contact is Die Kontaktart Dauerkontakt bzw. Impulskontakt wird mit- set by jumpers. The factory, the contact types are set to tels Jumper eingestellt. Werkseitig sind die Kontaktarten auf permanent contact.
DIGITAL MESSAGE MODULE DMM-618 A priority fault message contact TELEPHONE SYSTEM DMM-618 A RS-232 TIF-404 C AB Phone Extension 24 V DC release AAS-100 A fault message NETWORK mobile phone (up to 18 Contacts) HMH-01 O HMH-01 O HMH-01 O...
Seite 13
DMM-618 A DIGITAL MESSAGE MODULE Vorrang- Störmeldung TELEFON- kontakt ANLAGE DMM-618 A RS-232 TIF-404 C AB-Nebenstelle 24 V DC Auslösung AAS-100 A Störmeldung GSM-NETZ Mobiltelefon (bis zu 18 Kontakte) HMH-01 O HMH-01 O HMH-01 O HMH-01 O HMH-01 O Merkmale der Anwendungsbeispiele: 18 Texte auslösbar, über potentialfreie Kontakte oder RS-232...