Installation And Confi Guration Of The Software; A) Software Installation - Conrad 87 45 00 Bedienungsanleitung

• switch on your TV to which the device is connected as well now and select the corresponding
HDMI input.
While no contents are sent to the recipient, your TV will show all information, such as the
version of the fi rmware or the current password for the WLAN.
• Then switch on your computer and wait until the operating system has started up completely.
Attention! Only connect the WLAN USB key when asked to.
• Now continue with the next chapter to install the software.
8. Installation and Confi guration of the Software

a) Software Installation

Before being able to use the product, install the software on your PC fi rst. The driver for the
WLAN USB key is installed automatically.
Proceed as follows for installation:
• If you have not done so yet, switch on your computer and wait until the operating system has
started up completely.
• Place the enclosed CD in the appropriate drive of your computer.
• If setup does not start up automatically, navigate to your CD drive in Windows® Explorer and
start setup manually. Open the fi le "setup.exe" on the root directory of the CD.
Follow all instructions.
If Windows® sends any prompts of the "User account control", confi rm with "yes"
in any case. Otherwise, the installation will be cancelled.
• Terminate installation by clicking the button "Finish".
• Restart your PC when prompted.
• After completion, connect the WLAN USB key to a free USB port of your computer.
The driver should then be installed automatically and may take some time.
44