Instructions For Use - TECair 321224 Bedienungsanweisung

Instructions for Use

EN
Note the following safety instructions before wearing the helmet:
1. To be used as a riding helmet only!
2. Do not reuse the helmet after a hard blow, shock or impact!
3. Always make sure the strap is sufficiently fastened!
4. Please observe the indicated head dimensions!
5. Please do not change the helmet or the accessories!
6. Use only gentle soap, water and a soft cloth for cleaning!
7. Do not use any chemical cleaning agents or solvents!
8. Extreme temperatures can cause invisible damage to the helmet!
9. The helmet should be adjusted to the user's head as well as possible.
10. Even the safest helmet cannot provide absolute protection from injury but it helps
to minimize the risk of injury!
11. After having been used for five years, undamaged helmets should be exchanged
as a precautionary measure!
Fit and adjustment
In order to provide sufficient protection from impact, the helmet should be
adjusted properly. It should not be worn if it cannot be adjusted perfectly to
the head dimensions. Turn the adjustable ring at the back of the helmet for
perfect adjustment of the head ring. The helmet has been adjusted properly
if it holds on your head without the chin straps having been fastened and
without slipping off or without an unpleasant pressure feeling on your head.
Once the head ring has been adjusted, the chin straps should be fas-
tened. The helmet should fit tightly but it should not feel constricting
or unpleasant. The strap length can be adjusted according to fig. 1.
The strap length has been adjusted correctly if you feel slight pressu-
re on your chin when the helmet is closed. In order to open the
clamp (fig. 2.), press the ends of the interior part of the clamp toget-
her and slide it out of the closed part.
The helmet fits properly if the gap between the eyebrows and helmet is
approximately 1'' (see fig. 3+4). The fastened helmet cannot be turned,
lifted, or pushed back or forward.
Safety
The helmet was manufactured according to strict quality criteria and conforms
to the European (EN 1384) safety standards. Always make sure that the helmet
fits properly and has been adjusted correctly before using it!
Guarantee
This helmet comes with a half-year guarantee for complaints concerning fabric
and manufacturing defects. According to our discretion, the defective helmet is
either repaired or exchanged (free of charge for the customer). Customers are
solely entitled to a guarantee if they provide the manufacturer with both the hel-
met (free of charge) and the original receipt. Every change made to the helmet
by the user will void the guarantee.
4