Pool Maintenance Kit Assembly And Operating Instructions - Pool Prompt Set Bedienungsanleitung

E. Check your filter-pump cartridge every two weeks (or more frequently during periods
of heavy usage) to verify whether it needs to be cleaned or replaced. If your cartridge
is no longer white in color, attempt to spray it clean with a strong blast of water from
your garden hose. If your cartridge cannot be cleaned in this manner, the cartridge
must be replaced. Failure to frequently clean and/or replace your cartridges will affect
the effectiveness of your filter pump and could shorten its useful life.
F. Lastly, the following two tips are simple ways to help prevent dirt and grime from
getting into your pool water in the first place:
1) Remind your family and friends to always hose or rinse off any dirt or tanning oil from
their hands, feet, and body prior to entering the pool.
2) If your pool system included a cover, try to keep your pool covered at all times when
not in use. This will help keep the wind and other elements from depositing dirt and
debris in your pool, and will also prevent excess rainwater from overfilling your pool.
WARNING: Non-respect of the maintenance rules may result in serious hazards for
health and especially for the children.
POOL MAINTENANCE KIT ASSEMBLY AND
OPERATING INSTRUCTIONS
IMPORTANT: READ AND UNDERSTAND THE INSTRUCTIONS
COMPLETELY BEFORE STARTING ASSEMBLY.
POOL SKIMMER ASSEMBLY AND OPERATING INSTRUCTIONS
1. The pool skimmer uses the same shaft pieces as the pool vacuum.
2. The skimmer net has a plastic spring (M-4) that connects to the bottom shaft.
Align the plastic spring located inside the net with the holes drilled in the shaft.
Gently squeeze together the plastic spring tips so that the shaft slips onto the net
and the spring "POPS" into the pre-drilled holes.
3. Gently sweep the surface of the pool with the skimmer net removing floating
leaves, etc.
12