SINKEU R300 Benutzerhandbuch Seite 13

2). How to charge AC appliances with this product?
Connect the power cable plug of the electrical appliance to the AC outlet of the product, Shortly
press the power switch to turn on, then switch on the"AC" button and the unit will start offering power
to your appliances. It will display real-time wattage of the appliance on the LED screen at the same
time.
【Front】
WARNING! The AC outlets, AC voltage, and frequency are different according to different countries;
please carefully check whether the product specifications are consistent with the appliance
specifications before use, otherwise, it can lead to dangerous situations.
When the AC port is not in use, please turn the AC off to reduce power loss.
Protection Mode:
Short-circuit/Overpower Protection:
(- Load(s) power>300W), the unit will shut down AC output to protect itself. ※Some devices,
such as refrigerator, ice maker or a laser printer may require a surge power to start or work
during a very time period, the surge power could exceed 350W or even higher, this could cause
overpower protection with this unit. Please remove the devices and consult with the device
manufacturers for more information.
3). How to charge USB digital appliances with this product?
Connect the standard USB cable of the digital appliance to the USB output of the unit to gain
power. Then press the "
will display real-time wattage of the appliance on the LED screen at the same time.
Quick Charge Output:
max output for smart devices which also support Type-C. The actual output voltage and current
depend on the actual smart devices, it can be obtained by consulting the smart device manufacturer.
【Front】
If the AC output is short-circuited or overpowered
" button switch on and the unit will start offering power to the devices, It
This product supports Type-C output, supports 5V/3A; 9V/2A; 12V/1.5A
Limited Appliance Wattage<300W, such as lamp,Electric Fan,
TV, Game Machine, etc. AC will shut down when it's
short-circuted or power overloaded. Remove the device and the
unit will return to normal from short-circuit or overpower
protection in a few seconds. Repress the AC output button to
switch on AC out again.