WOOX R5076 Handbuch Seite 22

applies to any conversion or modification work.
EN
The device is intented for private use only.
Do not connect multiple pluggable switches
into one another.
If you use the device in a security application
it has to be operated in connection with an
UPS(uninterruptible power supply) in order to
bridge possible power failure according to EN
50130-4.
Device with electronic power supply units (e.g.
TV or high voltage LED light sources) are no
ohmic loads. They can generate inrush currents
with more than 100 A. Switching such kind
of loads may leads to premature wear of the
actuator.
The device may only be operated within
residential buildings.
21