Nordcap SKF 10 GN 1/1 PLUS Bedienungsanweisung Seite 75

7.8 "Special cycles" menu
Any important information for optimal cycle operation is displayed via
IMPORTANT!
pop-up.
To access the Special cycles menu, press the respective key on the "HOME" screen (see para.
7.5 "HOME" screen).
This menu consists of a series of preset cycles, which can all be edited according to the user's
needs.
APPLIANCE
Rev. 01 of 01/07/2019
Translation of the original instructions in Italian
ZUZUWEISEN, DER HIER ANGEZEIGT WERDEN
"Special cycles" menu
75
SOLL.
Fig. 7.11