Werbung
10. TV height
Step 1.To re-set TV height, need 2 man, 'A' man holds TV bottom by 2 hands as shown
in Fig 1.
Step 2. The 'B' man simply unscrew 2X safety screws from left and right poles by using
J (6mm Allen key) from hardware
spring balls on poles by using his thumbs,
up directions
reference
as shown in Fig 2.
Step 3.When height is determined,
Secure
2X safety screws firmly as shown in Fig 3.
Step 4.Routing
cables and wires from TV sockets through poles' upper cables windows
and lower cables windows
Step 1
Fig I
Step 2
Fig 2
Step 3
Fig 3
o
Spring
ball
re-set
and cables
to desire
viewing
height,
then let spring balls set into plunger holes respectively
as shown in Fig 4 , 5 and 6.
O
000
Fig 6
www.multibrackets.com
and wires
pouch, put screws aside. He then depress 2
so that 'A' man can let goes TV down or
using height
label
Height label
indicator
Note:
Be caution
when
routing
wires to
avoid damage.
O
installation
indicator
on pole as
Step 4
Fig 4
step 5
Fig 5
15
Werbung
