in-lite FUSION 22 Installationshinweise Seite 6

EN
Contents
1x FUSION 22 12 V / 0.25 W
Dimension Ø 22 mm / 0.9 inches
Recess height 50 mm / 1.96 inches
1x Easy-Lock
Material
Impact-resistant polycarbonate, filled with a 2-component resin
Please read the following instructions before installing. You are
advised to keep these installation instructions in a safe place.
Use
Integrated lighting suitable for highlighting paths, drives, patios, pond
edges etc.
Lamp
The fixture is equipped with a high-quality LED lamp. These lamps
have a long life and a high light output and their power consumption
and the heat produced are extremely low.
Important!
Never connect the low-voltage cable directly to a 100-240 V power
source. It is only suitable for use in combination with a 12 V low-voltage
system. This product should only be used within the in-lite system. Use
of products other than those made by in-lite will invalidate the warranty.
Enjoy the lighting in your yard.