How To Use - steelplay METALTECH Radiance Benutzerhandbuch

Compatibility
Wi-Fi® MODE
JACK 3.5 MM
MODE

How to use

Wi-Fi® wireless connection
(1) Wi-Fi® first time pairing:
● Connect the Dongle to USB-C or USB-A port with the adapter
● Hold the Power button for 3 seconds
● Voice invitation "POWER ON"
● The blue light flashes
● The voice message reads "CONNECTED"
(2) Automatically reconnect to previous device:
● Hold the Power button for 3 seconds
● The voice message reads "POWER ON"
● The blue light flashes
● The voice message "CONNECTED"
(3) Pairing with another device:
● Turn on the headset by holding the Power button for a few seconds, until the voice prompt
"POWER ON" is heard and the blue LED flashes
● On the smartphone or device, connect the dongle to USB-C or USB-A port with the adapter
● The voice message reads "CONNECTED"
Wired connection of 3.5 mm audio cable
Please connect the 3.5 mm audio cable to the headset (headset will auto power off) and the device
with 3.5 mm interface.
Microphone ON/OFF
Click the Mute button headset will voice prompts "Microphone OFF" or "Microphone ON" which
gives the status of the microphone.
Volume control
When you scroll the volume button up, the volume increases, and when you scroll it down, the
volume decreases.
Switch™ / Switch™ Lite / Switch™ OLED
Windows 7, 10 & 11
All plateforms which have jack 3.5 mm female plug
macOS
iOS
Android
10