Data Transfer - Octagon SF 1018 HD-Alliance Bedienungsanleitung


Set Favorite Services : Use the ARROW and OK buttons to
select your desired favorite group. Once, favorite group is
chosen, the left side window will show all service lists and the
middle window will only show the selected services of the
favorite group selected. By using the ARROW and OK buttons,
you may ADD the desired services to a favorite group or
DELETE any from the favorite group. The name of the favorite
group can be edited by pressing the GREEN button.
 Edit Services : All service names will be shown on the left side
of the window. Move the highlighted bar to the service where
you want to edit its name and press the OK button. Then you
will see the virtual keyboard. Using the ARROW and OK
buttons, you can edit the name of the service with the
keyboard.

1.4 Data Transfer

When the data transfer task is in process, the Front USB slot is set to a default device slot. But, if no
USB device is connected on a front USB slot, then the Rear USB slot is set as a device to be used for the
data transfer process.
NOTE : If no USB device is connected on either two (Front
& Rear) USB slots, then a Menu item will not be
available.
 Transfer all System data to USB storage : If you want to
transfer and use BOTH of the current system parameters and
service data in the future, this menu will allow you to store all
data to your USB device. Press OK button to store all current
data to an external USB storage.
 Transfer Service data to USB storage : If you want to transfer
and use ONLY the service data in the future, this menu allows
you to store current service data. Press the OK button to store the current service data to your external
USB storage. The service data can also be viewed and edited on a PC with an appropriate editor
(DrEdit) for the file saved.
 Data download from USB storage device : This menu allows you to download the saved data from
the external USB storage to your STB. Press OK button to download data.
37