Kin Sub & Vort Gebrauchsanweisung Seite 5

2. Use of the Sub & Vort pumps
The Sub and Vort pumps are submersible pumps made of plastic
and available only with float switch. The Sub is suitable for clean
water and the Vort can be used for dirty water. Some common
applications of these pumps are:
• Well pumping
• Domestic water supply
• Rainwater collection tanks
• Industrial water draining
• Irrigation
• Small fountain
• Garden irrigation
• Aquaculture
The temperature of the pumped fluid must be between 0°C and 35°C.
The liquid PH rate must be between 6.5 and 8.5
The pump is not suitable for use with flammable or dangerous liquids
The pump may not be submersed more than 5 meters.
Do not allow the pump to run dry or work out of the water.
For Sub pumps liquid may contain 0,1% (100 g/m³) solids with
maximum diameter of 0,2 mm.
Vort pumps can pump solids with maximum diameter of 30 mm.
kinpumps.com
Sub & Vort
GB
5