Compass ALU-HEAVY Bedienungsanleitung Seite 2

e
Universal bicycle carrier with multi lock system.
Attachment of bicycle is done simply, using frame
holder and wheel supports with clamping clips.
Both bicycle and carrier itself are lockable, there-
fore preventing thefts. The carrier is suitable for all
bicycles weighing no more than 15 kg.
The carrier is made of silver colored aluminium,
which allows for attachement using brackets and
also using the T-bolt.
Please read this manual thoroughly before use and save it
for future reference.
Assembly instructions
Assemble the carrier according to the drawing
and set the position of brackets to fit your bicycle
wheels.
Attach the carrier onto the roof rails using T-bolts
or brackets and tighten all connections thorough-
ly, to make sure no part moves freely.
2
Aluminium bicycle carrier
Technical specification:
Fixation
Lockable
Attachment
Material
Carrier lenght
Max. load capacity
Certification
Warning
• Driving without attaching one or both the front
and rear wheels to wheel supports is not permit-
ted!
• Only one bicycle can be attached to the carrier
• After 100 meters, check the fastening of all parts
again, then check the fastening continuously.
• Only bicycles with a tyre profile smaller than the
wheel supports can be attached to the carrier.
Tyre has to fit all the way into the bed of this sup-
port.
• Bicycle parts, such as handlebars and pedals,
must not exceed the contours of the vehicle.
• Damaged, or otherwise worn carrier should not
be used!
• Max. speed with the carrier atached to the car is
90km / h.
• Always pay attention to the overall height of the
car after mounting the bicycle.
• Check all attachments before leaving.
• The carrier has a maximum load of 15 kg.
wheels, frame
carrier, bicycle
bracket, T-bolt
aluminium, plastic
137 cm
15 kg
TÜV approved
item 02 109