Troubleshooting - Eratec ICE MAKER IM-7 Bedienungsanleitung

TROUBLESHOOTING

In this section you will find solutions to common problems. If you cannot solve the problem yourself, please contact our
customer service.
PROBLEM POSSIBLE CAUSE
The compressor is
not working
properly and is Possible reason: Lower voltage than recommended
making a buzzing
noise
The low water No water available
indicator light is on Pump is filled with air
The indicator lights
on the display do Possible causes: Defective fuse / no power
not work
SOLUTION
Make sure the ice machine is set correctly and wait
for the voltage to return to normal.
Add water until it reaches the maximum mark.
Press the POWER button to restart.
Replace the fuse / Ensure the device has power.
39