3. Maintenance
Some maintenance is necessary in order to use the BERG product and have fun with it for a long time.
This chapter describes how, how often, and which maintenance must be carried out.
3.1 Maintenance scheme
Daily
Wheels / Tires
•
Check for wear
•
Check the tire pres-
sure and if neces-
sary increase the
pressure.
3.2 Maintenance activities
3.2.1 Frame
•
The frame is powder-coated or black zinc plated. To prevent rust forming it is important to not
keep the pedal go-kart outside for a long time during rain and clean the frame regularly. If you
want to conserve the frame with grease, only use acid free substances. You can treat damaged
areas with paint.
•
Check the bolts and nuts for rust and replace them to prevent them from breaking which can cause
injuries.
3.2.2 Wheels / Tires
•
Regularly check the rims and tires for any damage (for example cuts, cracks and bulges). Attention:
damaged rims and tires can lead to accidents! The tires must not come into contact with oil, grease
or fuel.
Monthly
Frame
•
Clean and check all
nuts and bolts.
•
Check the frame
for any cracks and
fractures.
Driving Mechanism
•
Check chain for
correct tension.
•
Chain greasing.
•
Check for sand or
dirt and clean if
necessary.
•
Check and tighten
bolts.
Steering
•
Check all nuts and
bolts.
•
Lubricate the mov-
ing parts.
•
Clean and oil the
chains.
•
Check all screws and
bolts.
•
Check for sand or
dirt and clean if
necessary.
Half Yearly
Driving Mechanism
•
Check for correct
functioning of
bearings, chain, hub,
sprockets and axles.
Plastic parts
•
Clean the plastic
parts and check
damage
Yearly
Plastic Parts
•
Clean the plastic
parts and check for
damage.
EN
17