Switching Off The Alarm Signal; Snooze Function - FanJu FJ3551A Bedienungsanleitung

► Press " " button to confirm your setting, the weather forecast pattern display starts to
flash. Now use "
► Press " " to confirm your setting, then it will return to the normal time mode.
► During the time setting process, press the "SNOOZE/LIGHT" button to exit the setting
mode directly.
Setting the Daily Alarms
► Press "ALARM" button enters the display ALARM time, this now, press once "ALARM"
button, LCD display the "
button, the " " icon will disappear from the display, the alarm function is OFF.
► In the alarm time mode, after pressing the arbitrary button for 5 seconds, it automatically
returns to the normal mode.
► Press and hold "ALARM" button for 3 seconds until hour of the Alarm time starts to flash.
Use the " " and "
► Press "SET" button to confirm your setting, The Minute of the Alarm time starts to flash.
Use the " " and "
► Press "SET" button to confirm your setting.
F.Y.I.:
► If there is no valid operation within 10 seconds, it will automatically return to normal time
mode from the alarm time set mode.
►The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In
this case the alarm will be repeated automatically after 24 hours.
► Rising alarm sound (duration: 1 minutes) changes the volume 4 times whilst the alarm
signal is heard.

Switching OFF the Alarm Signal

►The alarm sound when the trigger, press any buttons except the "SNOOZE/LIGHT"
button or press and hold the "SNOOZE/LIGHT" button for more than 3 seconds to stop the
alarm signal.

Snooze Function:

FJ3551A-NORCC Manual
" and " " buttons to select the current weather pattern.
:
" icon, the alarm function is ON. Then press once "ALARM"
" buttons to set the required hour.
" buttons to set the required minute.