nedis TVRC2340BK Kurzanleitung Seite 3

a
Quick start guide
Universal remote control
For more information see the extended manual
online: ned.is/tvrc2340bk
Intended use
The Nedis TVRC2340BK is a universal remote control to replace
the original remote of your device.
This product is intended for indoor use only.
Any modification of the product may have consequences for
safety, warranty and proper functioning.
The product is not intended for professional use.
Main parts (image A)
On/off button
1
Volume up button
2
Volume down button
3
Mute button/LED
4
indicator
Channel up button
5
Channel down button
6
Youtube button
7
Prime Video button
8
Safety instructions
- WARNING
• Ensure you have fully read and understood the instructions
in this document before you install or use the product. Keep
the packaging and this document for future reference.
• Do not let children play with the packaging material. Always
keep the packaging material out of the reach of children.
• Only use the product as described in this manual.
• Do not open the product, there are no user serviceable
parts inside.
• Do not use the product if a part is damaged or defective.
Replace a damaged or defective product immediately.
• Do not drop the product and avoid bumping.
• Do not expose the product to water, rain, moisture, or high
humidity.
• Do not use aggressive chemical cleaning agents when
cleaning the product.
• Do not expose batteries to heat or fire. Avoid storage in
direct sunlight.
• In the event of a cell leaking, do not allow the liquid to come
TVRC2340BK
Disney+ button
9
Netflix button
q
OK button
w
Exit button
e
DVB-T button
r
DVD button
t
SAT button
y
TV button
u
4
in contact with the skin or eyes. If contact has been made,
wash the affected area with copious amounts of water and
seek medical advice.
• Properly dispose of empty cells or batteries.
• Seek medical advice immediately if a cell or a battery has
been swallowed.
• Only use the battery type(s) recommended in this
document.
• Keep cells and batteries clean and dry.
• Do not short-circuit a cell or battery.
• Do not use old and new batteries together.
• Make sure that the battery polarity (+/-) matches the
polarity markings inside the battery compartment.
• When possible, remove the battery from the product when
not in use.
Before first use
Newer Samsung, LG, Sony, Philips, and Panasonic TVs should
4
work directly.
1. Insert 2 type AAA batteries.
2. Aim the remote at your device.
3. Press the on/off button A
1
the product.
If your device switches on or mutes, the remote is ready
4
for use.
If your device does not switch off or mute, follow the steps
4
in the next chapter.
Programming the product to the device with
a code
1. Switch on your device.
2. Open the code list.
You can find the code list via the support page of the
4
product.
3. Search for the code for your device in the code list.
The codes are arranged in order of brand, device, type.
4
4. Press and hold the button corresponding to your device
(TV/SAT/DVD/DVB-T A
rtyu
The LED indicator A
4 lights up.
4
5. Enter the code from the code list.
If the LED indicator A
4 switches off, the code is correct.
4
If the LED indicator A
4 flashes twice and stays on, the
4
code has been declined. Repeat the previous steps using
another code.
6. Aim the remote at your device.
7. Press the on/off button A
1
the product.
or the mute button A
4 to test
) for 3 seconds.
or the mute button A to test
4
5