Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Features
IEC-60320-C13
IEC-60320-C19
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
B
3
A
1 1
2 2
E
3 3
C
IEC 309 Blue 32A (2P+E) Input Plug
Outlets: During normal operation, the outlets distribute AC power
to connected equipment. When an outlet is live, the associated
LED illuminates.
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
DRAWN
TOLERANCES:
CHECKED
FRACTIONAL
ANGULAR: MACH
BEND
ENG APPR.
TWO PLACE DECIMAL
THREE PLACE DECIMAL
MFG APPR.
INTERPRET GEOMETRIC
Q.A.
TOLERANCING PER:
COMMENTS:
MATERIAL
Outlet LED: Each outlet LED illuminates when the associated
-
WALTHER PLUG; IEC 309-2, 3-POL, 20A 250VAC
FINISH
NEXT ASSY
USED ON
-
APPLICATION
DO NOT SCALE DRAWING
outlet is ready to distribute live AC power. The IEC-60320-C19
2
outlets are arranged in pairs, and there are 2 LEDs below each
D
pair. The LED to the left
C
B
. The LED to the right
. Other outlet types have an LED
Digital Load Meter (Ammeter): The total connected equipment
A
load is displayed on the meter
B
multiple outlet banks can also display the connected equipment
load for each outlet bank. Use the mode selection switch
display the total load (all bank LEDs
for each outlet bank (corresponding bank LED illuminated).
Circuit Breaker: If the connected equipment load exceeds the
Maximum Load Rating of the PDU, the circuit breaker will trip.
Disconnect excess equipment and allow the breaker to cool
before depressing the plunger to reset the breaker. Models with
multiple outlet banks have a circuit breaker for each bank.
C14 Plug-Lock Inserts: Use the included C14 plug-lock inserts to
secure plugs to C13 receptacles. Attach the sleeve to the plug
making sure the pull tabs remain outside the plug and that the fit
is secure. To unplug equipment properly, use the pull tabs to
remove the plug and insert from the receptacle.
C20 Plug-Lock Inserts: Use the included C20 plug-lock inserts to
secure plugs to C19 receptacles. Attach the sleeve to the plug
making sure the pull tabs remain outside the plug and that the fit
is secure. To unplug equipment properly, use the pull tabs to
remove the plug and insert from the receptacle.
5
D
C
B
NAME
DATE
A
TITLE:
PLUG; IEC 309-2,
3-POL, 20A
250VAC
SIZE
DWG. NO.
REV
C
SCALE: 1:1 WEIGHT:
SHEET 1 OF 1
1
A
is associated with the upper outlet
C
is associated with the lower outlet
E
directly below each outlet.
A
in amperes. Models with
C
illuminated) or the load
D
B
to
Werbung
Inhaltsverzeichnis
