Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.3 SETTING THE OUTPUT VOLTAGE / OUTPUT CURRENT
4.4 DATA GROUP FAST STORAGE
Press the MEM + keys 1-9, you can save the output voltage, output current, overvoltage protection limit and overcurrent protection limit
in the corresponding data group. Confirm your entry with ENTER or cancel your entry by pressing the encoder. Press SHIFT + key 1-9 to
quickly recall the stored data. Press ENTER to confirm or press the encoder to cancel.
4.5 LOCKING THE KEYPAD
Press SHIFT + . to lock or unlock the keypad. The status of the keypad lock is automatically shown in the status bar on the display:
Keypad locked
Keypad unlocked
Press
the
I-SET
key
potentiometer to set the output value directly. Press the direction key to move the cursor. Of course, you
can also set the value using the keypad and confirm your entry with ENTER. If you have entered an incorrect
value, you can press the encoder to cancel your entry.
Press the V-SET key to set the output voltage. The procedure here is identical to that for setting the output
current.
Press SHIFT + I-SET or SHIFT+ V-SET keys to set the overcurrent protection/overvoltage protection limit.
The operation is identical to the setting of the output current.
The data group M0 represents the default data group and is loaded automatically every time the device
is started. Change and save the settings for M0 manually and your desired settings will be loaded at each
startup.
to
set
the
output
current
value.
You
can
use
the
encoder
25
Werbung
