ENG
REPLACING THE BATTERY (AA Battery 500 mAh)
• Unscrew the plastic cover from the light.
• Unscrew the two screws on the circuit board for the solar light in order to access the
battery compartment located under the circuit board.
• Remove the battery and insert a new rechargeable AA battery (with a capacity of at
least 500 mAh). Check that you have inserted the new battery correctly.
• Replace the circuit board and screws.
• Screw the plastic cover back in place on the solar light.
• Fully charge the new battery.
• Take the used battery to a recycling station.
4