Automatic Switch-Off; Bluetooth Mode - Reflexion SB300 Bedienungsanleitung

BASIC OPERATION
Automatic switch off

The unit has a power saving function according to the European ErP standard, which makes the unit
switch to standby mode after 15 minutes without an audio signal in Bluetooth, AUX-In and USB mode.
Press and hold the play/pause button for approx. 3 seconds to switch the unit back on.

Please note that a low volume setting of the audio source can be detected as "no audio signal". This
may affect the unit's signal detection capability and also trigger an automatic switch to standby mode. In
this case, please reactivate the audio signal transmission or increase the volume setting of the audio
source to resume playback.
Playback buttons
You control the playback and volume for Bluetooth, USB and micro SD card mode with the following buttons.
Play / pause button (short press)
Volume(+) key (long key press)
Volume(-) key (long keystroke)
Volume(+) key (short keystroke)
Volume(-) key (short keystroke)

BLUETOOTH MODE

Connect a device wirelessly via Bluetooth to the SB300 to play music from your external device on the SB300.
Only Bluetooth is received and not transmitted. No devices such as external Bluetooth speakers or Bluetooth
headphones can be connected to the SB300 for external playback. Follow the steps below to start Bluetooth
playback. Smartphones and other external devices are not included.
1. Switch on the SB300.
2. Select the Bluetooth mode with the Mode button.
3. The SB300 will automatically pair with the last connected Bluetooth device when it is in range.
4. The connection status is indicated by the status LED.

Connected: The status indicator lights up blue.

Not connected: The status indicator flashes blue.
5. If the SB300 is paired with an external Bluetooth device for the first time, start the search for available
Bluetooth devices on your external Bluetooth device, e.g. a smartphone.
6. Select the SB300 device from the list of found Bluetooth devices.
7. The connection is now established. If the two devices are paired, this is announced by a "Connected"
announcement and the status LED lights up blue.
8. You control the playback and volume on your external device or the SB300.
9. You can control playback with the buttons as described above under the item "Playback buttons".
10. To end the Bluetooth connection Disconnect the devices on your external device.
Notes:

Bluetooth works best within 10 metres and outdoors without obstructions.

If the basic volume on your external device is set too low, you may not be able to hear any sound
from the SB300. In this case, increase the volume on your external device.
Play / Pause
Next title
Previous title
Adjust volume (+)
Adjust volume (-)
19
UK