cecotec DRUMFIT CROSSFIT 3000 EOLO Bedienungsanleitung Seite 63

Functions
1. SCAN. Press the MODE key until the "SCAN" icon appears on the screen, the console will
display the 6 functions one by one: time, speed, distance, calories, ODO. Each display will
be held for 6 seconds.
2. Time. It counts the total training time from the start to the end of the workout. Press
the MODE key until the "TIME" icon appears on the display and press the SET key to
programme the target time of the training session. When the timer reaches 0, the console
will beep for 10 seconds.
3. Speed. It displays the current speed.
4. Distance. It counts the total training distance from the start to the end of the workout.
Press the MODE key until the "DIST" icon appears on the display and press the SET key to
select the target distance of the training session. When the distance counter reaches 0,
the console will beep for 10 seconds.
5. Calories. It counts the total calories burned from the start to the end of the workout.
Press the MODE key until the "CAL" icon appears on the display and press the SET key to
select the calories you want to burn during the training session. When the calorie counter
reaches 0, the console will beep for 10 seconds.
6. ODO. This function allows you to see the total distance travelled as it accumulates on the
console.
7. Alarm. The console will "beep" when the MODE, SET and RESET keys are pressed.
8. Automatic On/Off and Start/Stop. The console will automatically shut down after 4
minutes of inactivity. The console will stay on as long as the wheel is in motion or if any
key is pressed.
FUNCTION
Battery type
Operating temperature
Storage temperature
AUTO SCAN
Time
Current speed
Total distanced covered
Calories
ODO
ENGLISH
Every 5 seconds
00:00'~99:59'
0.0～99.9 km/h
0.00～999.9 km
0.0～999.9 kcal
0.0～999.9 km
2 AAA size batteries
0°C ~ +40°C
-10°C ~ +60°C
DRUMFIT CROSSFIT 3000 EOLO
63