Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Common power supply:
Attention: install a 1N4004 diode or an equivalent diode, or the reader
might get damaged. (1N4004 diode is included in the packaging).
Access control power supply:
Function Description
Enter the programming mode
Change the master code
Add card user
Delete card user
Exit from the programming mode
How to be granted access?
Card user
Programming will vary depending on access configuration. Follow the instructions according to your access configuration.
General programming information:
Remote control: please use the infrared remote control to program the reader. The infrared receiver is situated near the LED diode, so when
programming the reader, please direct the remote control to the LED.
User ID number: assign a user ID to the access card in order to track it. The user ID number can be any number from 1-2000.
IMPORTANT: user IDs do not have to be proceeded with any leading zero. Recording of user ID number is obligatory.
Proximity card: any 125KHz industry standard 26-bit EM proximity card or tag.
Enter and exit programming mode
Programming step
Enter programming mode
Exit programming mode
Set master code
SIMPLIFIED INSTRUCTION
Operation
*(master code) #
(123456 is the default factory master code)
0 (New master code) #
(repeat new master code) #
(code: 6 digits)
1 (Read card) #
(cards can be added continuously)
2 (Read card) #
(cards can be deleted continuously)
*
Read card
PROGRAMMING
Keystroke combination
*(Master code) #
Factory default is 123456
*
6
Werbung
