Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Wiring of sensor and EPS interface
3
For use of the sensor with EPS interface prior to installation of the sen-
sor: Use a suitable power supply (24 V power supply; ifm order no.
E30080).
For mobile use of the interface after installation of the sensor:
Disconnect power before connecting the unit.
Do not disconnect these connections while live.
L+
L-
n.c.
sensor
Core colours of ifm sockets:
1 = BN (brown), 2 = WH (white), 3 = BU (blue), 4 = BK (black).
n.c. = not connected
Programming
For programming of the sensor please use the FDT service program
ifm container (order no. E30110).
EPS RS-232 interface, FDT service program, power supply and con-
nection cable available as a set (order no. ZZ0050).
18
EPS RS232 interface
BN
1
WH
2
BU
3
BK
4
1
2
3
4
2
Rx
3
Tx
5
GND 2
Werbung
