Clas Ohlson IS901 Bedienungsanleitung

Wireless Music Headset
Art.no 38-6378 Model IS901
Please read the entire instruction manual before using
the product and then save it for future reference.
We reserve the right for any errors in text or images
and any necessary changes made to technical data.
In the event of technical problems or other queries,
please contact our Customer Services.
Safety
• Check your local regulations regarding mobile phone
use in combination with driving.
• Shut off both the headset and mobile phone in areas
where you are requested to do so, such as in hospitals,
aircraft or explosive environments.
• Use only the included USB lead to charge the headset.
• Do not let children play with the headset.
Things to consider
• Other wireless equipment using the same frequency
can reduce the transmission range.
• The range of all wireless equipment depends on
the type of obstacles located between the transmitter
and the receiver (e.g. a concrete wall will interfere
with the signal much more than a plasterboard wall).
If you experience problems, try the following
• Turn off any other existing wireless equipment to
check whether this is the cause of the problem.
• Move any other existing wireless equipment.
Shorten the distance between the sending and
receiving devices and reduce the number of
obstacles (walls, furniture, etc) between them.
GREAT BRITAIN
customer service tel: 0845 300 9799 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.com/uk
Buttons and functions
1. 3.5 mm headphone socket
1
2. [ ◄◄ ] Volume up,
previous track
3. Microphone
4. [ ] On/off, Bluetooth
connection, call control,
play/pause
[ ►► ] Volume down,
5.
next track
6. LED indicator
7. Micro USB charge port
Operating instructions
Charging
• Connect the charge cable to the headset and
computer or other USB charging device.
• When charging is in progress the red LED indicator
will be lit.
• The LED indicator shines blue once the battery is
fully charged.
Note: Fully charge the headset's battery before using it for
the first time. iPhone users will see the headset's battery
status icon appear next to their Bluetooth icon.
Turning the headset on
Hold in [ ] for 3 seconds. The LED indicator will flash
blue and an audible signal will be heard indicating,
"Power on". The headset will automatically connect to
the last device it was previously connected to, provided
that that device is still within range (max 10 m) and has
Bluetooth activated.
Turning the headset off
Hold in [ ] for 3 seconds. The LED indicator will flash
red twice and an audible signal will be heard indicating,
"Power off".
Connecting the headset to
a mobile phone via Bluetooth
1. Turn the headset off.
2
2. Hold in [ ] for 5 seconds. The LED indicator will
3
shine blue and an audible signal will be heard,
4 indicating "Power on" and "Pairing".
3. Activating Bluetooth on your telephone.
5
4. The headset will appear on your phone as "IS901",
6
select it and pair it with your device. Refer to
the instruction manual of your mobile for further
7
clarification if you are unsure.
5. If you are prompted to enter a PIN code, enter 0000.
6. The headset's LED will display a short blue flashing
pattern and emit an audible signal once a successful
connection has been established, indicating "Pairing
completed". The headset will flash blue in 5-sec
intervals to indicate an active Bluetooth connection.
Connecting the headset to a second
mobile phone via Bluetooth
The headset can be connected to 2 mobile phones at
the same time. Second device connection:
1. Connect the first mobile phone to the headset as
described above.
2. Turn the headset off.
3. Hold in [ ] for 5 seconds and connect the other
mobile using the same method used for connecting
the first mobile.
4. Turn the headset off.
5. Turn the headset back on again. The headset will now
be connected to both mobile phones simultaneously.
Calls
Mobile dialling
Call as you would normally using your mobile. Once
a call connection has been established, the call will
automatically be transferred to the headset.