Herunterladen Inhalt Inhalt Diese Seite drucken

Theory Of Operation - Henkel Loctite 97106 Bedienungsanleitung

Reservoir
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

2
Description
9
Pneumatic connection
The coaxial pneumatic hose to the controller 97101, 97102 or 97103 is connected here.
Outer hose O – Supplies the controller with unregulated pressurized air
(for connections, see Section 8.2).
Inner hose I – Supplies the product reservoir with regulated pressurized air from the controller.
Please pay attention that the ends of the tubes of the co-axial air hose are cut in a straight and clean
way. Otherwise the dispensing equipment can not function at all or only defectively.
10
Cover holder
11
Dripcup
Any suitable container of PP or PE can be used here.
12
Tank cord (automatic reservoir only)
13
Nesting block (2l reservoir only)
2.2

Theory of Operation

The original LOCTITE bottle is inserted into the reservoir.
The closed reservoir is supplied with regulated, pressurized air from the LOCTITE controller 97101,
97102 or 97103. As long as the dispensing valve is open, pneumatic pressure on the surface of the
fluid in the original LOCTITE bottle transports the product through the product line.
Automatic reservoir only:
When connected to a controller 97102 or 97103, the automatic reservoir is automatically pressurized
when the controller is switched on and automatically depressurized when the controller is switched off.
The depressurizing valve 5 must be in the valve position
No "empty" error message can be present.
The indications "refill" and "empty" are visible on the LED indicators 4 and also appear as blinking text
on the digital display of the controller. In addition, the error message "empty" is signaled with a
beeping tone by the controller (see operating instructions for the controller). After the error message
"empty", the automatic reservoir is automatically depressurized by the controller 97102 or 97103.
The automatic coupling of two automatic reservoirs („Daisy Chain") for continuous supplying of a
product dispensing position is possible only in combination with the controller 97103 (see operating
instructions for the controller 97103).
, coaxial
(pressurize).
27

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Loctite 97108

Inhaltsverzeichnis