Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
USING THE APPLIANCE / RADIO OPERATION / FM /
AM / FM-STEREO-RECEPTION / COMPACT DISC (CD) / PLAYING THE
ENTIRE DISC / SELECTION A DIFFERENT TRACK DURING PLAY / STARTING
AGAIN WITH THE TRACK THAT IS CURRENTLY PLAYING / STOPPING PLAY
/ LINE IN OPERATION / PROGRAMMED PLAYBACK
USING THE APPLIANCE
RADIO OPERATION
•
Set the CD/LINE/RADIO switch to radio.
FM
•
Select FM mode band selector switch. Turn the
TUNING control to select the required station.
The FM Stereo indicator light will show a stereo
broadcast is being received. Fully extend the
FM antenna andadjust its direction for best FM
reception.
FM
•
Select AM on band selector switch. Turn the
TUNING control to select the required station.
For operation on AM the set control a built-in
ferrite aerial which is directional. Therefore,
the set should be positioned for the best signal
strength.
FM-Stereo-Reception
•
For reception of a FM stereo broadcast
station, set the AM/FM/FM ST. switch to FM
ST. position. The "
light when a FM STEREO broardcast is being
received.
COMPACT DISC (CD)
•
The LCD indicator always shown the tracks of a
disc or program which are still to be played. It
works in all modes, in stop modes, all tracks of
the disc or the program are shown.
Playing The Entire Disc
•
Playing will start by pressing the PLAY/PAUSE
button, the "
" indicator then appears.
2
Playback starts with the first track. The display
shown the current number.
•
To interrupt playback, press the PLAY/PAUSE
button. The "
" indicator will flash.
2
•
To resume playback, press the PLAY/ PAUSE
button once again.
•
To stop playback, press STOP button
" indicator will
15
15
Selection A Different Track During Play
•
Press the SKIP/SEARCH button on the unit, the
required track number appears in the display.
•
Press the PLAY/PAUSE button to starting
playing. Starting again with the track that is
currently playing.
Starting Again With The Track That Is Currently
Playing
•
Press the SKIP F.R. once.
•
The track will be started again from the
beginning.
Stopping Play
•
Press the STOP button if you wish to stop play.
The disc and track number which can be played
will now appear in the display.
•
Open the CD door on the unit to remove the
CD.
Line In Operation
•
Push the CD/LINE/RADIO switch to the LINE
operation. This unit can input analog audio
through the LINE IN jacks.
•
Use a cable with RCA phones plays to connect
audio equipment.
Programmed Playback
Up to 30 tunes can be programmed for listening
and played.
•
Press the PROG button. (F.1)
•
Select the desired track number using the SKIP/
SEACH button. (F. 2)
•
Press the PROG button to memories the track
selection.
•
Repeat this steps as to memories up to 30
tracks.
•
Press the PLAY/PAUSE button, to play starts
with the first track of the program.
•
To stop playing, press the STOP button.
•
Opening the door clears all programs.
GB
Werbung
Kapitel
Inhaltsverzeichnis
