Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3 Programming / Use with EPS RS232 interface
Connect the sensor to a PC via the EPS-RS232 interface (order no.
E30066).
• The sensor is supplied with operating voltage by the interface,
• and transmits its data (measured values, analogue signal and para-
meter settings) continuously via the interface.
It provides the following options:
• Remote display
Indication of the current system pressure by PC or display.
• Remote evaluation
Output of the current analog value.
• Programming / remote programming of the sensor
Scaling the measuring range, damping for the analog output, cali-
bration of the sensor.
Parameters can be set before the sensor is mounted and set up or
during operation.
If you change the parameters during operation, the functioning
of the plant will be affected. Ensure that plant malfunction is
prevented.
16
EPS RS232 interface
L +
OUT
L-
PC
Werbung
