Herunterladen Diese Seite drucken

WerkaPro SPPE200 Aufbauanleitung Und Gebrauchsanweisung Seite 5

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 11
(EN) Introduction
Thank you for purchasing this quality product. To minimize the risk of injury by
means of fire or electric shock we urge that our clients take some basic safety
precautions when using this device. Please read the operation instructions carefully
and make sure you have understood its content.
Always use a grounded power connection with the appropriate mains voltage. You
can find the corresponding mains voltage on the type plate. If you have any doubts
about the connection being grounded, have it checked by a qualified professional.
Never use a faulty electric cable.
Do not inspect the electrical part of the pressure pond filter in a wet or damp
environment or when you are wet yourself and protect it from direct sunlight. Install
this device in a safe location so that nobody can step on the cable, fall over or
damage it. Make sure additionally you provide sufficient cooling through the
ambient air and avoid heat accumulation. Disconnect the power plug before
cleaning it and use only a damp cloth for cleaning.
The electric part of the device contains no parts that can be inspected or serviced
by the user. Leave the maintenance, adjustment and repair to qualified technical
personnel.
Features
1. Pump body, pump cover and impeller are made of high quality plastic
2. Big outlet, high lift, low noise
3. Good mechanical seal and durable.
4. With over load protection to ensure long lasting working
5. With simple suction and discharge pipes.
Application
These water pumps are designed for the circulation and filtration of the small
swimming pools (family use), whirl pools and Sauna pools.
Caution
For swimming pools and garden ponds and in its scope the use of the pump is only
permitted with fault current circuit breaker (30 mA) according to DIN VDE 100
part 702 06.92. Please address any questions to a qualified electrician.
Keep a safe distance to the pool and fix the pump on a stable base plate. According
to VDE standard is observed a safety distance of 2 m.

Werbung

loading

Verwandte Produkte für WerkaPro SPPE200

Diese Anleitung auch für:

14650