Safety Instructions - Proplus 367828 Gebrauchsanleitung

i
INDEX
SAFETY INSTRUCTIONS
USAGE
MAINTENANCE
FIRE AND VENTILATION
SAFETY INSTRUCTIONS
• Read the instruction manual carefully before use and keep it for future reference
• Make a test setup first before the product is used in practice
• Check the party tent for signs Of damage before use
• Ensure that the hose connection is not impeded (by a kink)
• The party tent is intended for use in light to moderate weather. In case of strong wind, we recommend
breaking off the party tent (setup) or not setting it up
• Long-term use in strong sunlight is not recommended;
a shady environment.
• UV damage is not covered by the warranty
USAGE
1) Unfold the party tent completely and place it in the correct position (fig 1)
2) Secure the four corners with the pegs (fig. 2)
3) Locate the inflation valves and ensure that they are fully tightened before air is pumped into the
party tent (fig 3, part A and B) The cap (fig 3, part C) must be loosened for inflation To deflate
the party tent, the middle ring must be loosened (fig. 3, part B)
4) Inflate the party tent, with the supplied pump, at the inflation valves (fig. 4).
The pump is protected against overload by means Of a pressure relief valve. If this pump is not used,
the recommended
5) Guide the party tent so that it is in the correct position (fig. 5)
6) Secure the party tent with the included pegs
7) Ensure the position of the party tent with the guy lines (fig 6)
INDEX
PRECAUTIONS
inflation pressure is 7 psi (0.48 bar)
6
if possible, set up the party tent (in part) in
6
6
6
7
7