Schwaiger UV Bedienungsanleitung Seite 12

USER GUIDE
TROUBLESHOOTING:
The device cannot be switched on:
Check if the product is sufficiently charged. If
necessary, connect it to a suitable power source.
The drying function does not start:
Check if the ventilation holes are free.
Check if the LED indication light is flashing blue.
The UV disinfection process does not start:
Check if the LED indication light flashes red.
Technical Data
Model
Connectors
Power supply
Battery
UV wavelenght
Disinfection time
Drying time
Size
Weight
Maintenance & Cleaning
This product is maintenance free. The lamp is not replaceable.
WARNING!
You must disconnect the device from the mains socket before cleaning. Ensure that no
liquids get into the product while you are cleaning it. The use of solvent-containing or
aggressive cleaning agents as well as alcohol or thinners is prohibited as it could dam-
age the coating or the surface of the product. You should therefore clean the product
with a lint-free, ever so slightly damp soft cloth only.
Storage
All parts must be completely dry before storing.
• Always store the product in a dry place.
• Store the product out of children's reach in a securely locked place and at a storage
temperature between 5 °C and 20 °C (room temperature).
662047 / 662092
1x Micro-USB port
5 V 1 A
2000 mAh Lithium-Ion
275 nm
Approx. 5 minutes
Approx. 30 minutes
85 x 65 x 231 mm
304 g
12