JBM 60047C Bedienungsanleitung Seite 7

REF.60047C
Using the tool
Do not force the tool.
Use the right tool to the work you need to do.
Do not use the tool if the trigger does not work
correctly.
Do not use any other charger than the one
specified by the manufacturer. A charger can
cause fire if it is used with unsuitable batteries.
Do not use the tool with batteries other than
those specified by the manufacturer. The use
of any other type of battery may cause fire.
If the batteries are not used, keep them away
from other metal objects such as coins,
keys, nails, screws or other small objects that
can lead to a connection from one terminal to
another.
If the battery is bad condition, it can eject li-
quid. Avoid any contact with the liquid, it can
cause irritation or burns. In case of accidental
contact, flush with water. If the fluid comes into
contact with eyes seek medical assistance.
It is advised to use the auxiliary handle.
Hold the tool by using the insulated gripping
surfaces. Otherwise, if the cutting accessory
contacts a "live" wire it could give the operator
an electric shock.
Keep hands away from rotating parts.
Do not touch the cutting accessory immedia-
tely after operation. It may be extremely hot
and could burn your skin.
Some materials contain chemicals which may
be toxic. Take caution to prevent dust inhala-
tion and skin contact.
TECHNICAL SPECIFICATIONS
Voltage: DC-20V
No-load speed: 0-550/0-2200rpm
Impact power: 0-35000bpm
Maximum torque: 150 Nm
Chuck size: 13mm
Gears: 2
Modes: 20+screwdriving, drilling, hammer-dri-
lling
Brushless motor: Yes
Weight: 1,60 kg
PARTS LIST
Number Description
1 Chuck
2 Speed selector
3 Working mode selector
4 Screwdriving torque selector
5 Direction selector and trigger
lock
6 Handle
7 Trigger
8 LED light
· 7 ·