Product Use - Tavo Base Bedienungsanleitung

Product Use

TO INSTALL BASE
1 Attach latch guides to vehicle lower anchor bars.
2 Unfold stability leg from bottom of base.
3
Guide rigid latch through latch guides onto vehicle lower
anchor bars.
4 If attached properly, base attachment indicator on rigid
latch will be green.
5 Squeeze base adjustment button to slide base as close
as possible to vehicle seat back.
6 Extend stability leg to floor by pressing stability leg
adjustment button (1) and pulling down (2).
Stability leg indicator will show green when stability leg
is in contact with floor (3).
Stability leg MUST be used when base is installed.
12 BASE
1
2
3
4
5
6
3
2
1
1
TAVO 13