Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Push/Converter functions
The bell push in this kit can be used as a stand-alone wirefree push. Additionally, it can be used to inter-
face with an existing wired doorbell system or any of the following:
A standard wired bell push
A lit bell push and transformer
A door or window contact
Any device with N/O or N/C, voltage free contacts
Any device which generates appropriate control signals < 24 (AC or DC)
See typical connections (C1-7)
Important Note: Additional wiring can be brought into the push through the grommet in the back of the push.
Once the grommet has been pierced or removed, we recommend that the push is mounted indoors.
Diagram
Applications
C1
wired bell push or 'normally open' switch/contacts
C2
door/window contact, 'normally closed' switch/contacts
C3
a lit push (with transformer) when switch is closed,
chime will sound
C4
landscape push/converter - terminal positions
C5
a typical wired bell or chime circuit - transformer powered
C6
converter connected to a wired bell or chime
circuit - transformer powered
C7
converter connected to a wired bell or chime
circuit - battery powered
Operation
when switch is closed,
chime will sound
when switch is opened, chime
will make an 'ALERT' sound
when switch is closed,
chime will sound
when push is operated,
Libra+ chime will sound
when push is operated,
Libra+ chime will sound
4
Werbung
