Herunterladen Diese Seite drucken

x-sense CD03 Bedienungsanleitung Seite 6

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 8
Note: This model is equipped
with a feature that automatically
Deactivation
of the
Alarm
! WARNING!
I . DO NOT
DEACTIVATE
THE ALARM
UNIT UNTIL
2. ONCE THE MAXIMUM
LIFETIME (l O YEARS) IS REACHED, THE ALARM DELIVERS 2 BEEPS EVERY 30 SECONDS.
3. ONCE THE ALARM IS DEACTIVATED,
IT WILL NO LONGER FUNCTION.
REPLACED.
To Deactivate
the
Alarm
Pressing the Test/SiIence button can silence the end-of-life signal for up to 3 days.
1. Peel back the shaded abe obstructing the "DIS' setting, and break the thin plastic guard, as be ovv.
2. Twist the plastic pin upwards to the "D S" position or insert a screwdriver into the slot and turn the dia
the "D S" position.
3. Dispose of the alarm.
4. Replace the alarm.
activates the alarm when the alarm is attached
THE END-OF-LIFE
SIGNAL
HAS BEEN HEARD.
IT CANNOT
BE REACTIVATED AND MUST BE
• 08 •
to
Weekly Test
!
WARNING!
I. NEVER USE A VEHICLE
VOID
YOUR
WARRANTY.
2. DO NOT
STAND
CLOSE
HARMFUL TO YOUR HEARING. WHEN TESTING, STEP AWAY WHEN THE ALARM BEGINS TO SOUND.
Maintenance
To keep your CO alarm in good working order, fol ow these simple steps:
1.Verify the unit's alarm sound and indicators are working p operly by testing the unit once a week.
2. Remove the unit from the ceiling/wal
month
to remove
dust
3. Never use detergents or other so vents to clean the unit.
4. Avoid spraying air fresheners, hair spray or other aerosols near the alarm.
5. Do not paint the unit. Paint WI seal the vents and interfere with the sensor's abi ity to detect CO. Never attempt to
clockwise
to
disassemble the unit or clean inside. Doing so WI void your warranty.
6. When removed, place the CO a arm back in its proper
from carbon monoxide
7. When household cleaning supplies or similar contaminants
WARNING!
DO NOT TAMPER WITH THE APPARATUS, AS THERE IS A RISK OF ELECTRIC SHOCK OR MALFUNCTION.
EXHAUST
TO TEST THIS UNIT.
EXHAUST
FUMES
TO THE ALARM
WHEN
THE ALARM
IS SOUNDING.
and clean the alarm cover and vents with a soft brush attachment
and
dirt.
ocation as soon as possible, to assure continuous
poisoning.
are used, the area shou d be venti ated.
• 09
MAY
CAUSE
PERMANENT
DAMAGE
AND
EXPOSURE
AT CLOSE
RANGE
MAY BE
once a
protection

Werbung

loading

Verwandte Produkte für x-sense CD03

Diese Anleitung auch für:

Cd04