Sansui G-5700 Betriebsanleitung Seite 18

18
FM
MUTING
On
OFF
M1
5 TUNING Control
Use it to tune in on the frequency of a desired AM or FM station.
6 SIGNAL Indicator
It indicates the signal strength at the antenna input terminals of a re-
ceived AM or FM station.
7 TUNE Indicator
The optimal tuning position for FM broadcasts is achieved when the
round indicator light in the center of the TUNE indicator lights up.
When tuning slips slightly from the optimal tuning position, the round
indicator light goes off and one of the triangular indicators at the left
and right of the round indicator light comes on. The triangular indica-
tor lights point in the direction the tuning control should be moved.
When tuning slips totally from signal, triangular indicator lights also go
off. .
@ TUNE Indicator is not in operation during AM reception.
8 FM MUTING Switch
The built-in muting circuit eliminates the irritating noise heard while
you are tuning from one FM station to another. Since it also eliminates
weak signals, set the FM MUTING switch to OFF to receive faraway
stations with faint signals. Keep it at ON at all other times.