FLINQ Smart Indoor Light E27 Handbuch Seite 4

EN Manual
Installation
Install the E27 lamp
1 Open the FlinQ app
Open the FlinQ app on your
mobile device.
Wi-Fi - 5GHz Wi-Fi - 5GHz
Wi-Fi - 2.GHz
Wi-Fi name
************
4 Follow instructions
Now follow the instructions within
the application during connection
and confi guration.
6
Add Device
Create Scene
2 Add device
Select 'Add Device' or the '+' sign
and make sure the light is fl ashing
rapidly. If the lamp does not fl ash
quickly, Turn the lamp on, turn
FlinQ Smart Indoor Light E27
Being added...
6 Device is being added
The device is installed. This can
take up to 2 minutes.
Notes: Please note that only 2,4 GHz networks are supported. 5GHz
networks will not work. Ask your provider how to turn on both frequencies.
it off immediately and turn on
the lamp after 10 seconds. After
1 second, turn off the lamp for 1
second and turn it on again. The
lamp is now ready to pair.
7 Device added succesfully
The device is installed succesfully
and added to your list of
products. You can now setup
timers and control your device
remotely.
FlinQ Smart Indoor Light E27
FlinQ Smart Indoor
Light E27
3 Select product type
Select your product type via the
lighting section tab. Please select
the 'FlinQ Smart Indoor Light E27'.
7