FLINQ Smart Indoor Light E27 Handbuch Seite 3

EN Manual
Specifi cations
Luminous Flux 806LM
Luminous Effi cacy 89.5LM/W
Dimmable Yes via FlinQ app
Beam Angle (deg) 200°
CCT (K) 2700-6500K+RGB
Life time 15000hrs
Installation
Before you begin
Make sure your mobile device is running iOS 9 or higher or Android 5 or
higher. Verify your Wi-Fi network/name and ensure your mobile device
is connected to the same 2.4 GHz Wi-Fi network/name/router (5.0 GHz
Networks are NOT supported!).
IMPORTANT: Make sure that the lamp is set up, placed and covered inside
the same Wi-Fi network as the router and mobile device during the 1st
setup!
Download the FlinQ App
Search for 'FlinQ' in the Apple App Store or the Google Play Store and
download the application.
Register / Login / Profi le
1. Open the FlinQ application.
2. Tap 'agree' to confi rm the privacy policy.
3. To register, please enter your mobile phone numer or email address.
4. Press 'verifi cation code retrieval'
5. Enter the verifi cation code that was sent to your phone number or
email address.
6. Create a password and login for the new app user. If you already have an
existing account, please go to Login.
Note: Please note that only 2,4 GHz networks are supported. 5GHz
networks will not work. Ask your provider how to turn on both frequencies.
4
Setup voice assistent
Note: Please note that only 2,4 GHz networks are supported. 5GHz
networks will not work. Ask your provider how to turn on both frequencies.
1 Google Home & Amazon Alexa
To control your device by using your voice via a smart speaker, please
refer to the manufacturers instructions manual on how to enable a voice
command through your device. Follow the installation steps on the next
page fi rst before you setup your voice assistant.
FlinQ Smart Indoor Light E27
5