Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Grinder
1. Remove the front cover as shown.
2. Follow the sequence in the figure, connect the auger knife, the meat cutter knife and the selected grinding
wheel to the grinder, then screw in the cover nut clockwise.
3. Follow the sequence in the figure, connect the auger, spacer and sausage attachment to the grinder, then
screw in the cover nut clockwise.
4. Follow the sequence in the figure, connect the auger, kebab attachment and kebbe attachment to the grinder,
then screw in the cover nut clockwise.
5. Follow the sequence in the illustration, connect the auger knife, spacer and cookie attachment to the grinder,
then screw in the cover nut clockwise.
* Be sure to disconnect the cover nut before replacing the accessories.
6. Align the protrusions on the robot with the cutouts on the grinder, connect the grinder and turn it
counterclockwise. After connecting, tighten the cover nut.
7. Connect the feed bowl to the grinder and then place the bowl under the grinder outlet.
8. Switch on the appliance, set the appropriate speed and then slide the food into the food grinder with the pusher.
9. When you have processed food, switch off the appliance and unplug it. Then remove the pusher and disconnect
the feed tray.
10. Press the grinder release button, turn it clockwise and disconnect it.
All butcher's attachments, including the grinding wheels for the meat grinder, are stored in a plastic pusher!
Release
1.
Button
3.
5.
2.
4.
6.
33
str
Werbung
