Renkforce CR01E Bedienungsanleitung Seite 2

Operating instructions
Card reader CR01E USB 2.0
Item no. 1095086
Intended use
The product can be connected to a USB port of a computer. It is designed to read and
write corresponding memory cards.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product.
If you use the product for purposes other than those described above, the product may
be damaged. In addition, improper use can cause hazards such as short circuiting,
fire, electric shock etc. Read the instructions carefully and keep them. Make this
product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All
company names and product names are trademarks of their respective owners. All
rights reserved.
Delivery content
• Card reader
• USB cable
• Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may
become dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong
jolts, high humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a
low height can damage the product.
• Also observe the safety and operating instructions of any other devices
which are connected to the product.
• Consult an expert when in doubt about operation, safety or connection of
the device.
• Maintenance, modifications and repairs are to be performed exclusively
by an expert or at a qualified shop.
• If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
Operating elements
a) Connection
• Switch your computer on and wait until the operating system is completely booted.
• Connect the USB cable included in the delivery with the card reader.
• Connect the USB cable with a free USB port of your computer or USB hub. Windows
recognizes the card reader automatically.
• Afterwards, the slots of the card reader appear in the File Explorer as additional
drives.
b) Removing memory cards
• Insert the memory card into the corresponding slot of the card reader; there is only
one correct orientation. Do not use any force when you are inserting it! Several
slots can be used simultaneously, if for example, you wish to transfer data between
the memory cards.
• If there is any read/write access on the memory card, wait until it is finished.
• Only then remove the memory card. If the memory card is pulled out during a read/
write access, the data on the memory card may get damaged, and it may even be
necessary to reformat the memory card.
c) Plugging in and Unplugging the Card Reader
• Remove all plugged in memory cards before the connection or the disconnection
of the card reader or before turning the computer off in order to prevent possible
damage to the data stored in the memory card or the memory card itself.
d) Reading/Writing of Memory Cards
• Each plug-in unit of the card reader is integrated like a normal removable medium
drive. Windows automatically allocates additional drive letters. You can now read
the data on the memory cards in File Explorer (or record data on the memory cards)
as you do with hard discs or floppy drives.
Tips & Notes
• For some memory cards (e.g. high speed memory cards, CF memory cards with
integrated hard disks) a high power USB port is necessary; this is a USB port, that
can provide a power of more than 100mA (e.g. the USB port of the mainboard or of a
USB hub with its own plug-in power supply). USB hubs without own plug-in power
supply provide, in general, max. 100mA per USB port. This might lead to malfunction.
The same is valid if several memory cards are inserted simultaneously in the card
reader. In such cases, always use for the card reader a USB port of the computer or
a USB hub with own power supply unit.
• When deleting or writing on memory cards in SD or memorystick format you have to
make sure that the write protection is off.
• Use preferably a USB2.0 port to connect the card reader. USB ports of older
computers in keyboards or in monitors often support USB1.1 only. Here, the max.
data rate is approximately 1Mbyte per second. Depending on the speed of your
memory card, with USB2.0, several Mbyte/s are possible! Therefore, for a fast
transfer, you should always use a USB2.0 port for the card reader (tremendous
saving of time during data transfer!).
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product according to the
relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the
environment.
Technical data
Suitable for ...........................................CFI / CFII / MS / MS PRO / MS DUO / MS PRO DUO /
System requirements .........................Windows® 2000, XP Home Pro SP 1, 2, 3, (32 bit)
Operating voltage................................5 V/DC USB
Connection standard ..........................USB 2.0 / 1.1
Cable length .........................................1 m
Dimensions (W x H x D)......................54 x 9 x 76 mm
Weight ...................................................32 g
These operating instructions are published by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
© Copyright 2014 by Conrad Electronic SE.
miniSD / SD / SDHC / SDXC (max. 32 GB)/
microSD / microSDXC / MMC / M2 / XD
Vista™ (32 / 64 bit), 7 (32 / 64 Bit), 8, 8 Pro,
Win Enterprise, Win RT, Mac OS 10.5.1 or above
V1_0514_02-HK