JBM 54176 Bedienungsanleitung Seite 4

EN
INSTRUCTION MANUAL
PRODUCT DESCRIPTION
Multi-position ladders are an essential item for any pro-
fessional who needs a tool to work at different heights.
The main advantage of multi-position ladders is that
they can be adjusted to different shapes and sizes by
extending outwards or inwards.
SAFETY INSTRUCTIONS
-Install and use the ladder correctly according to the ins-
tructions and safety warnings.
-Wear footwear with non-skid soles.
-Take extra precautions when carrying anything on a
ladder.
-Climb facing the ladder.
-DO NOT climb the ladder if you are not physically and
mentally prepared for the task.
-DO NOT lean to one side, or attempt to move the ladder
while on the ladder. Lower and reposition the ladder clo-
ser to your work area.
-DO NOT exceed the maximum load capacity.
-DO NOT allow more than one person on the ladder.
-Always make sure the ladder is on a stable surface.
-Check that all hinges are in the correct position.
-The ladder should never be used if any parts are mis-
sing, damaged or worn.
TECHNICAL SPECIFICATIONS
Maximum length: 3.7m
Capacity: 150kg
Material: Aluminum
Aluminum thickness: 1,2mm
Space between two rungs: 28cm
Maximum load: 150kg
ASSEMBLY
1. Place the stabilizer bar on the end of the side rails.
2. Secure the stabilizer bar with nuts and bolts.
HINGES
1. To unlock the hinges, simply move the levers to put the
pin in the unlock position "O".
2. The hinges automatically lock into position once the
ladder is deployed (pin in "L" position).
3. Always check that all hinges are securely locked into
position before using the ladder.
4. Each pair of hinges must be locked simultaneously.
5. It is extremely dangerous to attempt to modify the po-
sition of the ladder, hinges or operating joints while the
ladder is in use.
6. Always keep the joints clean and free of any foreign
material.
L: Locked
O: Unlocked
CAUTION! Make sure the hinge is locked in the "L" position
before using the ladder.
· 4 ·
REF. 54176