Lampa AMPEROMATIC LITHIUM PLUS Bedienungsanleitung Seite 7

EN
BATTERY CHARGER AMPEROMATIC LITHIUM PLUS
KEEP THE USE INSTRUCTIONS FOR FUTURE REFERENCE
For your safety, please read and understand the Use Instructions and labels included in the package and on the
battery charger before using the device.
To ensure safe operation, the owner/user of the device must fully understand the operating functions of the de-
vice before use. The owner/user must be aware that use and repair of the device may require special training and
knowledge. To use the device in respect to the law, Use Instructions and cautions must be available in the user's
mother tongue. In case of any doubts concerning safe and proper use of the device, stop using it immediately.
CHECKING THE DEVICE BEFORE EACH USE
Never use the device in case it is damaged or deformed, or in case the cover is cracked, or in case any other parts
are apparently damaged. In case the battery charger is damaged in any way or does not work properly or any of
its parts is missing, the battery charger should not be used any longer.
Be advised to have the device checked by a professional every year. Spare labels and Use Instructions may be
obtained on request from the manufacturer.
Product description
The built-in electronic "Auto Shut-off" function protects the battery from overcharging. Thanks to constant char-
ging current and automatic switch to battery optimum charge maintaining mode using pulse recharging, the
battery working life and power is extended.
The device has been designed only for use in closed areas and for short-time use in open areas.
NEVER expose the device to rain, snow, fog or high air humidity.
1. Mode button
Charging mode:
- Press the mode button repeatedly to select the type of accumulator charging- STD/GEL,AGM,LFP
(lithium LiFePo4). Mode button will light red if connected dead/wrong battery or wrong connecting or short circuit.
Lighting green if everything is well.
- After charging the accumulator, the charger automatically switches to changed mode in which the microprocessor
delivers targeted charging without overcharging or damaging the battery.
Battery tester mode:
- For testing,only battery current is used,do not connect the charger to the 230V mains during the testing
- Connect the charger to the car/battery
- The battery symbol will show connected battery condition.
2.Indicator for GEL,STD
5. Indicator for battery
7
3.Indicator for Winter
mode/AGM
4. Indicator for LiFePo4
condition