CMP HT0042 Bedienungsanleitung Seite 5

7. Hold down: ON / OFF
8. Quick press: Next track // Hold down: Volume +
9. Quick press: Previous track // Hold down: Volume -
10. Quick press: Play / Pause // Hands free kit
Hold down: Decline call
appropriate charging adapter.
- While the product is charging, the light-up charging
indicator on the USB-C port lights up red. This light goes out when the speaker is
completely charged.
The battery life of the product is approx. 6 hrs but this will depend on the type of music input and
volume used.
2) Starting up and pairing the device
Switch the speaker on by holding down the ON/OFF button (1).
In the "ON" position. The speaker changes to Bluetooth mode and is ready to be connected. Activate
the Bluetooth function on your smart phone, then search for the Bluetooth device named "HT0042".
Connect the device. It is now possible to listen to music on the speaker. Your smart phone should
remain within approx. 10 m of the Bluetooth speaker.
Switch off the speaker when not in use. To do this, press the ON/OFF button (1) again, so as to put
the speaker into the "OFF" position.
You can insert a micro SD card in the opening (7) to play mp3 files directly.
3) Operation
Main details about the speaker,
You can adjust the volume and play parameters from your phone.
You can also use the control keypad located on the upper part of the speaker (see diagrams above).
Warnings for use:
Do not let children use the device without adult supervision.
Do not expose the device to excessive heat, flames or fire.
Take care not to open, modify or take apart the product. Taking the product apart may cause an
electrical or fire risk. In the event of product malfunction, consult a specialist technician. Do not allow
this product to be in contact with combustible materials or high levels of heat. Do not dispose of in fire
or flames.
Unplug the device when it is not in use for long periods or during storms.
1.
Setting up:
8.
6.
1) Charging:
2.
-
5.
into the charging port on your
3.
speaker.
- Insert the standard USB key on the
USB charging cable into the USB
4.
port on a computer or in an
9.
7.
Insert the
micro USB
charging cable provided
10.
1. Jack plug 3.5 mm
2. USB Type-C charging port
3. Micro SD card reader
4. LED indicator + microphone
5. Reset parameters
6. Connection indicator