1byone Beautural Bedienungsanleitung Seite 3

WATER DROPLETS
EN
DE
in this iron show our commitment
FR
to high quality.
ES
This Iron is 100% quality tested.
IT
Getting to Know Your Iron
4 5 6
3
2
1
1. Soleplate
2. Spray Noozle
3. Water Inlet Cover
4. Variable Steam Knob
5. Steam Burst Button
6. Spray Button
Product may vary slightly from what is illustrated.
7
8
9
10
11
12
7. Cord Sleeve
8. Measuring Cup
9. Indicator Light
10. Temperature Control Dial
11. Water Tank
12. Self-Clean Button
2
How to Use
This product is intended for household use only.
IMPORTANT
This product was thoroughly tested by our QA team in our factories prior to shipping.
Some residual water from the testing might remain in the unit or the water tank. This
is normal and we guarantee this is a brand new product.
• Remove all labels, stickers and tags attached to the body of the iron.
• The ceramic-coated soleplate doesn't come with protective film, which is normal.
Only stainless steel soleplates need the protective film.
• Use ordinary tap water for ironing. If the water is very hard, it is possible to mix
untreated tap water with distilled or demineralized water.
• For optimum performance, turn the iron on and let it stand for 90 seconds before
beginning to iron.
• Always stand the iron on its heel rest when powered on but not in use.
• The iron may give off some smoke and emit an odor when first used. This will cease
after a short while. It is safe and will not harm the performance of the iron.
Filling with Water
Tilt the iron and pour water into the water tank opening
using a clean filling cup until the water reaches the MAX
level as indicated on the water tank. Refill as needed.
Note: If you need to add water while ironing, unplug the iron from the power
supply and follow the above steps.
3
EN
DE
FR
ES
IT