Installation - Vaxcel Loft Bedienungs Und Installationsanleitung Handbuch

Safety instructions specific to this fan:
Attach the fan only directly to the ceiling structure.
-
The carrying capacity of the ceiling structure from which the fan is hung must be at least
-
100kg.
The minimum distance between the blades of the fan and the floor must be 2.3m.
-
Never mount the fan outside or in a humid or wet environment. The fan can not be installed
-
within proximity of water (e.g. bath tub, swimming pool, water connection).
The fan can only be installed horizontally on the ceiling.
-
Install only bulbs of the type intended for your fan.
-
Switch off the power before connecting, repairing or cleaning the fan.
-
The rotor area has to be kept clear of any objects at all times.
-
Be careful when working near the rotating blades.
-
FAN OVERVIEW
1. Motor housing
2. Fan blades
3. Canopy
4. Fan light housing
5. Glass shade
6. Switch for rotating direction
UNPACK THE FAN
Unpack the fan and check that contents of are complete.
-
Dispose of packaging – see also "Disposal".
-
Contents of packaging:
Instructions for installation and use
Mounting bracket
Motor housing
Fan blades
Fan light housing
Glass shade
Note: In case of damaged or missing parts, please contact your retailer.

INSTALLATION

Risk of electric shock: Switch off the electricity using the switch at the circuit breaker box before
installing the fan.
Risk of electric shock: The electrical installation must be performed by a qualified electrician
and must be in accordance with national and local regulations.
Risk of injury: In case you need to drill holes for mounting the fan, make sure that the drills have
sufficient distance to in-ceiling wiring.
Canopy
Screws
Spring washers
Flat washers
Transmitter for remote control
Receiver for remote control
2