Herunterladen Inhalt Inhalt Diese Seite drucken
Verfügbare Sprachen

Verfügbare Sprachen

INSTRUCTIONS FOR INSTALLATION AND USE
Ceiling Fan Model Loft (FN511XX)
BEFORE YOU START
Proper use:
This product is intended exclusively for non-commercial use as ceiling fan.
-
The product has to be installed and used in accordance with these instructions.
-
Any use of this product that is not in accordance with these instructions will void the legal
-
warranty of the manufacturer.
Please keep the original carton and packaging material as the warranty will only be honored if product
is returned in complete original packaging.
FOR YOUR OWN SAFETY
General safety instructions:
For the safe use of this product, you need to have read and understood these instructions
-
before installing or using the product.
Please follow all safety instructions! If you ignore these safety instructions, you will endanger
-
yourself and others.
Keep these instructions for future reference.
-
All parts of this product have to be installed properly in order to ensure safe operation.
-
Modification of the product and use of non-approved parts are prohibited.
-
This product is not intended for use by persons (including children) with reduced physical,
-
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning the use of the product by a person responsible for
their safety. Children should be supervised to ensure that they do not play with the product.
Electrical safety:
The electrical installation must be performed by a qualified electrician and must be in
-
accordance with national and local regulations.
Use a fault-current circuit breaker with a rated residual current of no more than 30 mA.
-
Make sure to install an all-pole disconnection switch having a contact separation of at least
-
3mm between poles in the supply wiring to the ceiling fan.
Before connecting the appliance to the electrical grid, make sure that it will only be operated
-
within the specified parameters.
The fan must be properly grounded to avoid the risk of electric shocks.
-
Switch off the power before connecting, repairing or cleaning the fan.
-
Install only bulbs of the type intended for your fan.
-
Storage and transport::
Always store the fan in a dry environment.
-
Protect the fan from damages during transport.
-
1
Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Vaxcel Loft

  • Seite 6: Bevor Sie Beginnen

    INSTALLATIONS- UND BEDIENUNGSANLEITUNG Deckenventilator Modell Loft (FN511XX) BEVOR SIE BEGINNEN Bestimmungsgemäßer Gebrauch: Das Gerät ist ausschließlich zum nichtgewerblichen Betrieb als Deckenventilator bestimmt. Das Gerät muss entsprechend den Vorgaben dieser Anleitung installiert und betrieben werden. Jede nicht bestimmungsgemäße Verwendung bzw. alle nicht in dieser Anleitung beschriebenen Tätigkeiten am Gerät stellen unerlaubten Fehlgebrauch ausserhalb der gesetzlichen...
  • Seite 7: Das Gerät Im Überlick

    Gerätespezifische Sicherheitshinweise: Der Deckenventilator muss in einer Mindesthöhe von 2,30 m (Abstand vom Boden zu den Rotorblättern) installiert werden. Das Gerät darf nur direkt an die tragende Deckenstruktur montiert werden. Der Deckenventilator darf nur an Decken angebracht werden, die mit einer Last von mindestens 100 kg belastet werden dürfen.
  • Seite 8 1. Führen Sie die Zuleitungskabel 2. Hängen Sie die Decken- 3. Installieren Sie den Empfänger durch die Öffnung im Montage- ventilatoreinheit mit der Kugel- der Fernbedienung wie ab- bügel. Befestigen Sie den aufhängung an den Montag- gebildet. Stellen Sie sicher, dass Montagebügel an einem Decken- ebügel.
  • Seite 9: Bedienung

    BEDIENUNG Vor dem Einschalten Gerät überprüfen! Vorsicht, Verletzungsgefahr: Das Gerät darf nur in Betrieb genommen werden, wenn beim Überprüfen keine Fehler gefunden werden. Ist ein Teil defekt, muss es unbedingt vor dem nächsten Gebrauch ersetzt werden. Vorsicht, Verletzungsgefahr: Vor dem Einstellen des Richtungsschalters das Gerät immer stromlos schalten und warten, bis es vollständig zum Stillstand gekommen ist.
  • Seite 10: Störungen Und Hilfe

    Beachten Sie bitte, dass durch unsachgemäße Reparaturen auch der Gewährleistungsanspruch erlischt und Ihnen ggf. Zusatzkosten entstehen. TECHNISCHE DATEN Geschwindigkeit Nennspannung Nennleistung Umdrehungen/min 230V ~ / 50Hz HERSTELLER Vaxcel International Co., Ltd. 121 E North Avenue, Carol Stream, IL, USA www.vaxcel.com...

Diese Anleitung auch für:

Fn511xx

Inhaltsverzeichnis